Expert Answers about Ford F-250 and F-350
- Does Re-Keying Kit DTLBM02RK Fit all Diversi Tech Ball Mounts
- Do you have a Diversi Tech adjustable aluminum ball mount that locks? If so yes these do fit what you have. If you have a fixed ball mount these wouldn't fit.
If you check out the install video I attached you can see what ball mounts this kits as well as see how the kit installs. If what you have matches the video this will work well.
view full answer... - Trailer Hitch Recommendation for a 1994 Ford F-250
- When measuring the frame width on a vehicle, you will need to measure from the outside of one frame rail to the outside of the other frame rail. It sound like you have the 37-1/4 inch frame on your 1994 Ford F-250. Usually, you see the more narrow frame on cab and chassis models.
The CURT Trailer Hitch, # C15300, does not fit vehicles with a 34 inch frame but will fit the 37-1/4 inch frame. I have included a link to the installation instructions for you. It is possible that the holes will...
view full answer... - 6-Way Recommendation for Trailer and Tow Vehicle
- For the trailer side 6-way you would want the part # PK11604 and then for the matching socket you would want the part # PK11609.
view full answer... - Recommended Underbed Gooseneck Hitch and 5th Wheel Hitch For 1994 Ford F-250/350
- I have another option for you that has great reviews and is similar to the hitch you mentioned, but we do not currently carry Putnam products.
I recommend taking a look at the B&W Turnoverball Underbed Gooseneck Hitch W/ Custom Installation Kit # BWGNRK1110 if your 1994 Ford F-250/350 has overload springs, or # BWGNRK1100 if your truck does NOT have overload springs.
The B&W Turnoverball offers a 30000lb gross towing weight limit, 7500lb vertical load limit, and has a limited lifetime...
view full answer... - Could Fifth Wheel Trailer with Non Extended Pin Box be Towed with Turning Clearance
- In order to determine that you'd also need to factor in the width of the nose of your trailer. If it happens to be a trailer with a lot of taper to the nose then you might be able to get away with a fixed hitch instead of a slider but most likely you would need a slider hitch like the Curt A20 slider part # C16541.
If your trailer has a tapered nose I recommend using the below formula to check your clearance:
(A + B) - C = Clearance
A = Distance from center of fifth wheel hitch jaw to...
view full answer... - Recommended Gooseneck and Fifth Wheel Hitch Options for a 1992 Ford F-350
- Going with a gooseneck or fifth wheel hitch will be up to you in the end, but I will get some pros and cons listed out for you so you can make an informed decision on the matter. To start with, lets look at the fifth wheel option.
The Reese Above Bed Rails # RP30035 will allow the Reese 5th Wheel Trailer Hitch # RP30047 to sit securely in the bed of your 1995 Ford F-350.
The Upsides:
-A fifth wheel like this is it is rated to tow a trailer weighing up to 16,000 pounds which will definitely...
view full answer... - Recommended Plug-In Trailer Wiring Harness For 1993 Jeep Wrangler YJ
- We do have a plug-in wiring harness that is designed to fit your 1993 YJ.
I recommend the T-One wiring harness # 118356. This plugs into Jeep wiring located behind some protective covers on the driver side and passenger side near the rear bumper. I have attached a link to an installation video for this wire harness on a Jeep you can check out.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical...
view full answer... - Recommended Weight Distribution and Sway Control for a 2011 Ford F-250 Towing a Keystone Trailer
- Yes, you could certainly add a weight distribution system and sway control to improve your towing performance, but the systems we offer for 2-1/2 inch trailer hitches are going to be a bit too heavy duty for your particular trailer. The 2-1/2 hitch systems would be compatible for tongue weights up to 1700lbs, but your trailer, even with a maximum load, should only have around 975 or 1000lbs of tongue weight. In this case, I would typically recommend a system rated for tongue weights up...
view full answer... - Recommended Trailer Backup Camera Wiring Harness and Connection for Truck Monitor
- The Rear View Safety Backup Camera System - Mirror with Monitor - Flush Mount Backup Camera # RVS-772718 is a great option for your F-350. To use this system with a trailer camera, you will also need the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit # RVS-213 for a single camera or Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133.
view full answer... - Parts Needed to Flat Tow a 1996 Ford F-350 7.3 Behind an RV
- Welcome back! There are no confirmed custom base plate fits for the 1996 Ford F-350 trucks so in order to flat tow it you would need to have Blue Ox universal base plates # BX88266 installed. A professional installation is recommended.
For a compatible tow bar you can use the Avail # BX7420 if the truck is under 10,000 pounds. If it is over 10,000 pounds the only option is the Trion # BX7520P which has a lunette ring coupler so the hitch it attaches to would have to be a pintle hitch.
For...
view full answer... - Replacement Linkage Solution for Kwikee Step Series 32 Solution
- For Kwikee Step Series 32, the correct assembly is Kwikee Gear Box Linkage # LC379160. Just the linkage by itself is not available.
view full answer... - Adapter to go from 7-Way Round Pin on 1993 Ford F-350 to a 7-Way Blade Style Connector on a Trailer
- There is an adapter to go from the 7-Way round pin connector on your 1993 Ford F-350 to a 7-Way blade style connector for the trailer. It is Trailer Connector Adapter # HM47425. Assuming that your 7-Way round pin and the 7-Way in your truck bed are both wired to each other (which is very likely) all the functions, including the brake output circuit, will function when using this adapter.
view full answer... - Ford F-350 Dummy Tag Axle Using Timbren Trailer Axle with #42 Spindle and 8 on 6-1/2 hub
- Here is what I would recommend. While all your options would require a lot of modification, the Timbren ASR400S02 only offers 1" of deflection (suspension travel) which would more than likely be easily damaged when driven. I would say to use the Timbren # ASR1THDS01. It offers the most deflection of 3-3/8". That should limit the chance of damage when the main suspension does travel.
Timbren doesn't offer any #42 spindles for for this particular item. I recommend having #42 Spindle # TRU57FR...
view full answer... - Fifth Wheel Rail Kit Recommendation for 1993 Ford F-350 Long Bed for Reese Hitch
- We have just what you need. To install your Reese fifth wheel hitch in the bed of your 1993 Ford F-350 long bed all you need is the Reese fifth wheel rail kit part # RP30035 which is a confirmed fit for your truck.
view full answer... - How to Paint the Bulldog Weld On Coupler.
- You can use virtually any paint that is rated for use on steel and outdoor use for the Bulldog Collar-Lok Coupler # BD028499
The most important part is going to be the prep. You will want to use a light sandpaper or SOS type pad to scuff the area intended for paint. Make sure to get all the rust off. A oil and grease Cleaner # 34910965 will ensure that the surface is free of any chemicals and the paint will adhere properly. You should apply painters tape over any areas such as the decals...
view full answer... - Picking Out Replacement AC Shroud for Coleman Mach AC 8335 8964
- The part number you listed is actually a capacitor part number but from that I am pretty sure I identified what unit you have and the correct shroud would be the part # MA00-325001. The dimensions of this does pretty closely match what you mentioned as well although not exactly. See attached picture.
view full answer... - Mounting Two Yakima ShowDown Kayak Carriers on 1996 Ford F-250 Extended Cab
- The Yakima ShowDown Kayak or SUP Carrier # Y04081 requires at least 3-1/2 inches of crossbar overhang beyond the feet/towers for proper operation. If the existing 58 inch bars on your F-250 overhang by just 1/16 of an inch then you will need bars that are longer by at least 7 inches.
For this requirement the Yakima Round 66 Inch Crossbars # Y00410 will work perfectly to mount 1 ShowDown Carrier (this is actually the size Yakima recommends for your F-250 when using the 1A Towers).
Now...
view full answer... - Recommended 13 Wheel and Tire for a 1972 EZ Loader Trailer
- For your application I recommend the Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel with a 5 on 4-1/2" Bolt Pattern # AM31985. Just make sure that the Load Range D (1,610 lbs at 65 psi) is correct and that you have enough room for the 7" section width and 24.1" overall diameter. I know the bolt pattern is slightly different but I believe you measured your bolt holes outside to outside when you actually measure from the outside of one to the middle of one across from it. This...
view full answer... - Overall Length of Pilot Nerf Bars part # NB-1216X
- I spoke with my contact at Pilot and they informed me that the overall length of the Pilot Nerf Bars part # NB-1216X that you referenced is 84 inches.
The width of the "C" is 18 inches and the height of each bar is 4-1/2 inches tall.
view full answer... - Trailer Hitch for the Back of a 2012 Forest River Classic Lite
- Trailer hitches that can be installed on the back of trailers do not have a specific fit list so I recommend going with the hitch that is the most versatile and that is Curt hitch # 13703. It fits frame widths from 22 to 72 inches. Frame width is measured from the outside of one frame rail to the outside of the other. It can fit box, C-Channel, and I-Beam frames and it can be bolted or welded on (welding should be done by a professional welder). I have linked a video showing an example...
view full answer...
Go To Results